[PFD/PFW ]
Error 81- can be caused by the following:
Platinum for DOS session and and Platinum for Windows session is open on the same machine. I.E: .Running a PAS on a workstation at the same time PFW client is open. This is not a supported configuration.
Memory issues
Make sure to have Files=125 in the Config.sys or Config.nt
DOS Platinum (including the PAS) Make sure SHARE.EXE is being loaded
Also you can increase the F: parameter for the share.exe; /F:5100.
INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY ACCOMPANY THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
The user assumes the entire risk as to the accuracy and the use of the information supplied. This information may be copied and distributed subject to the following conditions: 1)All text must be copied without modification and all pages must be included; 2)If software is included, all files on the disk(s) must be copied without modification; 3)All software included and documentation must be distributed together; and 4)This information may not be distributed for profit.
Copyright © 1997 Platinum Software Corporation. All Rights Reserved.
Platinum and Platinum NT are registered trademarks of Platinum Software Corporation.
All other trademarks contained herein are acknowledged.